The Wacker Neuson O-Ring is a genuine OEM sealing component designed for a broad range of Wacker Neuson equipment, including DPU and DPS series reversible vibratory plate compactors, PT2H and PT3H centrifugal trash pumps, the HSH350 hydronic surface heater, the DS70 diesel rammer, and the E1100 ground heater. As a genuine OEM part, the is manufactured to the exact material and dimensional specifications required for a proper seal in your machine. This O-Ring serves critical sealing duties across multiple product families, making correct part number identification essential before ordering — verify your model number against the fitment list to confirm compatibility.
Key Features
- Genuine OEM Material Specification — Manufactured to Wacker Neuson's exact compound and durometer rating, ensuring the O-Ring seats and compresses correctly in its designated groove without cracking or extrusion under operating pressure.
- Direct Drop-In Seal Replacement — Dimensionally identical to the original, so it seats into the existing groove without reworking mating surfaces or hardware.
- Broad Cross-Family Fitment — A single part number that spans DPU/DPS reversible vibratory plate compactors, PT2H and PT3H trash pumps, the HSH350 hydronic surface heater, the DS70 diesel rammer, and the E1100 ground heater — confirm your specific model before ordering.
- Leak Prevention at the Source — A compromised O-Ring allows fluid or pressure to bypass the seal, leading to fluid loss, pressure drop, or contamination ingress; replacing it promptly restores system integrity.
- Fuel and Fluid System Safety — In fuel and hydraulic circuit applications, a failed O-Ring can cause leaks that create fire or environmental hazard risks; using the correct OEM-spec replacement maintains safe system containment.
An O-Ring is a circular elastomeric seal installed in a machined groove between two mating surfaces or around a shaft, valve, or port. Its job is to compress slightly when assembled, blocking the passage of fluids, gases, or contaminants between those surfaces. When an O-Ring hardens, cracks, or becomes permanently deformed from heat and pressure cycling, the seal fails — allowing leaks that can starve a hydraulic circuit of pressure, allow fuel to escape, or let water enter a sensitive assembly. Replacing a worn O-Ring with the correct OEM part restores the sealing geometry the system was designed around, preventing larger component damage downstream.
Part Details
| Part Number | 5000108696 |
|---|---|
| Old Part Number | 0108696 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | O-Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
