The Wacker Neuson is a genuine OEM O-Ring 8 x 1.5 designed for a broad range of Wacker Neuson equipment including DPU and DPS series reversible vibratory plate compactors, PT2H and PT3H centrifugal trash pumps, HSH350 hydronic surface heaters, DS70 diesel rammers, and E1100 ground heaters. As a factory-sourced component, the is manufactured to the exact material and dimensional tolerances required for proper sealing across all listed applications. Confirm your model number against the fitment list before ordering to ensure this is the correct O-Ring for your machine.
Key Features
- Exact OEM Sealing Geometry — Manufactured to Wacker Neuson's precise 8 x 1.5 mm dimensional specification, ensuring correct compression and full contact against mating surfaces.
- Genuine Wacker Neuson Part — Sourced directly from Wacker Neuson, this O-Ring carries the same material compound and durometer rating as the original installed part.
- Broad Cross-Family Fitment — Compatible with DPU 2440H through DPU 3760Hets plate compactors, DPS1850H and DPS3060Hv single-direction plates, PT2H and PT3H trash pumps, HSH350 hydronic surface heaters, DS70 rammers, and E1100 ground heaters.
- Leak Prevention — A correctly seated O-Ring maintains fluid or pressure containment within its circuit; a worn or damaged seal allows leaks that can lead to fluid loss, contamination, or pump and hydraulic system damage.
- Direct Drop-In Replacement — This O-Ring seats into the same groove and mates to the same port or fitting as the original, requiring no machining or modification to the host assembly.
- Fuel and Fluid System Integrity — Where installed in fuel or hydraulic circuits, a compromised O-Ring poses a fire or contamination risk; replacing with the correct OEM specification part restores safe operating conditions.
An O-Ring is a circular elastomeric seal that fits into a machined groove and is compressed between two mating surfaces to prevent the passage of fluids or gases. In equipment like vibratory plate compactors, trash pumps, and hydronic heaters, O-Rings are found throughout fuel systems, hydraulic circuits, coolant passages, and pump housings. When an O-Ring hardens, cracks, or takes a set from heat and age, it loses its ability to maintain a seal — resulting in leaks, pressure loss, or fluid contamination that can degrade performance or damage surrounding components. Replacing a failed O-Ring promptly with the correct OEM part is one of the most cost-effective ways to protect the larger assembly it seals.
Part Details
| Part Number | 5000108696 |
|---|---|
| Old Part Number | 0108696 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | O-Ring 8 x 1.5 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
