The Wacker Neuson is a genuine OEM O-Ring designed for a wide range of Wacker Neuson equipment, including HSH350 hydronic surface heaters, PT2H and PT3H centrifugal trash pumps, DPU reversible vibratory plate compactors, DPS single-direction vibratory plates, DS70 diesel rammers, and E1100 ground heaters. As a factory-sourced component, the meets the exact material and dimensional specifications set by Wacker Neuson, ensuring a proper seal in every application it serves. This O-Ring is a direct-fit replacement that installs without modification across its broad fitment range. Keep a spare on hand — seal replacements are one of the most common service items across pump, compactor, and heater platforms.
Key Features
- OEM-Grade Seal Material — Manufactured to Wacker Neuson's exact compound and durometer specifications, ensuring consistent compression and chemical resistance across fluid and heat-transfer applications.
- Drop-In Replacement — Matches the original groove dimensions exactly, seating cleanly without trimming, stretching, or shimming during installation.
- Broad Cross-Platform Fitment — Confirmed fit across HSH350 hydronic surface heaters, PT2H and PT3H trash pumps, DPS and DPU vibratory plates, DS70 diesel rammers, and E1100 ground heaters.
- Prevents Fluid and Pressure Loss — A failed or cracked O-Ring allows fluid bypass or pressure drop, which can cause pump cavitation, heater inefficiency, or hydraulic leaks in compaction equipment. The 5000108696 restores a proper seal and full system integrity.
- Fuel and Fluid System Compliance — In pump and heater applications, a correctly rated O-Ring is critical for containing pressurized fluids safely. Using a correctly specified OEM part eliminates the risk of seal incompatibility with the fluids present in these systems.
An O-Ring is a molded loop of elastomer used to create a static or dynamic seal between two mating surfaces — typically at ports, fittings, covers, or fluid passages. When seated correctly in its groove, it is compressed just enough to block fluid or gas from escaping around the joint. Over time, heat cycling, chemical exposure, and mechanical pressure cause O-Rings to harden, crack, or deform, breaking that seal and allowing leaks that can lead to pressure loss, fluid contamination, or equipment damage. Replacing a worn O-Ring with a correctly specified part restores the seal to original condition and protects the components around it.
Part Details
| Part Number | 5000108696 |
|---|---|
| Old Part Number | 0108696 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | O-Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5000009242, 5100014963, 5100014964 |
| PT2H Pump | PT2H | 5000009094, 5000009097, 5000009239 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| Single Direction Vibratory Pla te, 18kN, 50cm/20in | DPS 1850H | 5000008397, 5000008750 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
