The Genie 8915GT is a genuine OEM Hex Head Cap Screw, 1/4-20 x 1.25, built for a wide range of Genie equipment including GS scissor lifts, S and Z series boom lifts, GTH telehandlers, light towers, and vertical mast and personnel lifts. As a direct OEM replacement, this screw is manufactured to the exact dimensions and material grade specified by Genie, ensuring a correct fit every time. Cross-reference part number 8915GT against your machine's parts manual to confirm it is the right fastener for your application. DHS Equipment stocks this part to keep your equipment back in service without delay.
Key Features
- Exact-Fit Replacement — Threaded to 1/4-20 with a 1.25-inch length, this screw matches the original fastener profile and installs directly without modification.
- Broad Genie Equipment Coverage — Fits GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, GTH telehandlers, TZ trailer-mounted booms, light towers, and push-around personnel lifts across the Genie range.
- Structural Integrity Where It Counts — A fastener of the wrong thread pitch, length, or grade can back out under vibration or fail to clamp correctly; using the specified OEM screw keeps panels, guards, and assemblies properly secured.
- Cost-Effective to Stock — A small hardware item that affects a wide range of machines; keeping a supply on hand means a missing or damaged screw does not become a reason to ground equipment.
A hex head cap screw is a fully threaded or partially threaded fastener with a six-sided head driven by a wrench or socket, designed to clamp two or more components together with a controlled clamping force. On Genie aerial lifts, telehandlers, and support equipment, fasteners like this one secure covers, guards, brackets, and structural panels throughout the machine. A screw that is the wrong length can bottom out before clamping or protrude and foul adjacent components; one with the wrong thread pitch will strip its mating thread or fail to engage it at all. Replacing a worn, stripped, or missing screw with the correct OEM part restores the assembly to its original condition.
Part Details
| Part Number | 8915GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/4-20 x 1.25 |
Compatibility & Fitment
| Name | Models |
|---|---|
| AL4L | AL4L |
| AL5HT | AL5HT |
| AL5L | AL5L |
| AWP | AWP |
| AWP Super | AWP Super |
| AWP Super Series | AWP Super Series |
| CWP Super Series | CWP Super Series |
| DPL-25S | DPL-25S |
| DPL-30S | DPL-30S |
| DPL-35S | DPL-35S |
| Genie Lift | Genie Lift |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GRC-12 | GRC-12 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2032 | GS-2032 |
| GS-2046 | GS-2046 |
| GS-2632 | GS-2632 |
| GS-2646 | GS-2646 |
| GS-3232 | GS-3232 |
| GS-3246 | GS-3246 |
| GS-4047 | GS-4047 |
| GTH-644 | GTH-644 |
| GTH-842 | GTH-842 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| IWP Super Series | IWP Super Series |
| Load Lifter | Load Lifter |
| PLC PLI | PLC PLI |
| QS-12R | QS-12R |
| QS-12W | QS-12W |
| QS-15R | QS-15R |
| QS-15W | QS-15W |
| QS-20R | QS-20R |
| QS-20W | QS-20W |
| RL4 LED Vertical Mast | RL4 LED Vertical Mast |
| RL4 Vertical Mast | RL4 Vertical Mast |
| S-45 | S-45 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-65 TRAX | S-65 TRAX |
| S-85 | S-85 |
| S-100HD | S-100HD |
| S-105 | S-105 |
| S-120HD | S-120HD |
| S-125 | S-125 |
| SX-150 | SX-150 |
| SX-180 | SX-180 |
| TML-4000N | TML-4000N |
| TZ-34/20 | TZ-34/20 |
| TZ-50 | TZ-50 |
| TZ-50/30 | TZ-50/30 |
| Z-30/20 | Z-30/20 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20HD | Z-30/20HD |
| Z-34 IC | Z-34 IC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 IC | Z-34/22 IC |
| Z-34/22 N | Z-34/22 N |
| Z-45/22 | Z-45/22 |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-51/30J | Z-51/30J |
| Z-60/34 | Z-60/34 |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-135/70 | Z-135/70 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
