The Genie 6888GT is a genuine OEM Hex Head Cap Screw, 1/4-20 x 1, built for a wide range of Genie equipment including GS scissor lifts, S and Z series boom lifts, TZ and TMZ trailer-mounted booms, GTH telehandlers, light towers, and vertical mast and personnel lifts. As a factory-sourced fastener, it meets the exact thread pitch, length, and material grade Genie specifies for the positions it fills. Cross-reference part number 6888GT against your machine's parts manual to confirm it is the correct fastener for your application before ordering.
Key Features
- Genuine OEM Fastener Grade — Manufactured to Genie's dimensional and material specifications, ensuring correct thread engagement and clamping load for the fastened joint.
- Exact Thread and Length Match — 1/4-20 thread pitch and 1-inch length match the original hardware, so the screw seats fully without bottoming out or under-engaging the mating threads.
- Broad Equipment Compatibility — Fits GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, TZ and TMZ trailer booms, GTH telehandlers, AL, RL, and TML light towers, and Genie personnel and material lifts.
- Structural Integrity at the Joint — A correctly specified fastener maintains the clamping force a joint is designed around; an incorrect size or grade can allow movement, loosening, or component damage over time.
- Direct OEM Replacement — Sourced directly from Genie, this screw installs in place of the original without modification or thread chasing on properly maintained hardware.
A hex head cap screw is a threaded fastener with a hexagonal head driven by a wrench or socket, used to clamp components together or secure assemblies to a structure. The 1/4-20 designation refers to the screw's nominal diameter and thread pitch, while the 1-inch length determines how far the fastener extends into or through the mating part. Using the correct thread specification matters because a mismatched pitch will cross-thread or strip the receiving hole, and an incorrect length can leave threads under-engaged or cause the screw to bottom out before adequate clamping force is reached. On Genie aerial lifts and related equipment, fasteners like this one appear throughout the machine in panel attachments, guards, covers, and structural joints — replacing a worn or missing screw with the OEM-specified part keeps those connections secure and the assembly performing as designed.
Part Details
| Part Number | 6888GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/4-20 x 1 |
Compatibility & Fitment
| Name | Models |
|---|---|
| AL4000 | AL4000 |
| AL5000 | AL5000 |
| AWP | AWP |
| AWP Super | AWP Super |
| AWP Super Series | AWP Super Series |
| CWP Super Series | CWP Super Series |
| DPL | DPL |
| DPL-25S | DPL-25S |
| DPL-35S | DPL-35S |
| Genie Hoist | Genie Hoist |
| Genie Lift | Genie Lift |
| Genie Tower | Genie Tower |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GRC-12 | GRC-12 |
| GS-30 | GS-30 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2032 | GS-2032 |
| GS-2046 | GS-2046 |
| GS-2632 | GS-2632 |
| GS-2646 | GS-2646 |
| GS-2668 DC | GS-2668 DC |
| GS-2668 RT | GS-2668 RT |
| GS-3232 | GS-3232 |
| GS-3246 | GS-3246 |
| GS-3268 DC | GS-3268 DC |
| GS-3268 RT | GS-3268 RT |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| IWP | IWP |
| IWP Super Series | IWP Super Series |
| Load Lifter | Load Lifter |
| PLC PLI | PLC PLI |
| RL4 | RL4 |
| RL4000 | RL4000 |
| S-45 XC | S-45 XC |
| S-60 | S-60 |
| S-60 HC | S-60 HC |
| S-60 J | S-60 J |
| S-65 | S-65 |
| S-65 TRAX | S-65 TRAX |
| S-65 XC | S-65 XC |
| S-80X | S-80X |
| S-100 | S-100 |
| S-100HD | S-100HD |
| S-105 | S-105 |
| S-120 | S-120 |
| S-120HD | S-120HD |
| S-125 | S-125 |
| S-3200 | S-3200 |
| S-3800 | S-3800 |
| SX-125 XC | SX-125 XC |
| SX-135 XC | SX-135 XC |
| SX-150 | SX-150 |
| SX-180 | SX-180 |
| TML-4000N | TML-4000N |
| TMZ-34/19 | TMZ-34/19 |
| TMZ-50/30 | TMZ-50/30 |
| TZ-34/20 | TZ-34/20 |
| TZ-50 | TZ-50 |
| TZ-50/30 | TZ-50/30 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
| Z-25/8 | Z-25/8 |
| Z-30/20 | Z-30/20 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20HD | Z-30/20HD |
| Z-34 IC | Z-34 IC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 IC | Z-34/22 IC |
| Z-34/22 N | Z-34/22 N |
| Z-45/22 | Z-45/22 |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/25 | Z-45/25 |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-51/30J | Z-51/30J |
| Z-60/34 | Z-60/34 |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-135/70 | Z-135/70 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
