The Genie 6090GT is a genuine OEM Hex Head Cap Screw, 1/4-20 x.75 built for a wide range of Genie equipment, including GS scissor lifts, S and Z series boom lifts, GTH telehandlers, and Genie personnel and material lifts. As a direct OEM replacement, this screw is manufactured to the same specifications as the original hardware installed at the factory. Cross-reference part number 6090GT against your machine's parts manual to confirm it is the correct fastener for your application before ordering.
Key Features
- Genuine OEM Dimensional Conformity — Manufactured to OEM specifications with correct thread pitch, grip length, and head geometry for a consistent, repeatable fit across all listed applications.
- 1/4-20 x .75 Thread Specification — The 1/4-20 thread and .75-inch length are the defining specs of this fastener; the correct size ensures proper torque engagement and secure clamping without bottoming out or stripping.
- Broad Genie Equipment Compatibility — Fits Genie GS scissor lifts, S and Z series boom lifts, GTH telehandlers, TZ trailer-mounted booms, and multiple Genie personnel and material lift lines.
- Structural Integrity at Every Fastening Point — A correctly specified hex head cap screw maintains secure connections between components; an undersized, oversized, or worn fastener can lead to joint loosening and component movement under load.
- Hex Head Drive — Standard hex head profile accepts common hand and power tools, making installation and removal straightforward during service and inspection.
A hex head cap screw is a fully threaded or partially threaded fastener used to clamp components together or secure assemblies to a structural member. The hex head allows high torque to be applied with a wrench or socket, making it well suited to the demanding connection points found throughout aerial lifts, telehandlers, and personnel lift structures. When a fastener stretches, corrodes, or is replaced with an incorrect size, thread engagement is reduced and the joint can work loose — compromising the connection it holds. Using the correct OEM-specified part number 6090GT ensures the fastener meets the thread, length, and material requirements Genie engineered for each mounting location.
Part Details
| Part Number | 6090GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw, 1/4-20 x .75 |
Compatibility & Fitment
| Name | Models |
|---|---|
| AL5000 | AL5000 |
| AWP | AWP |
| AWP Super | AWP Super |
| AWP Super Series | AWP Super Series |
| CWP Super Series | CWP Super Series |
| DPL | DPL |
| DPL-25S | DPL-25S |
| DPL-35S | DPL-35S |
| Genie Lift | Genie Lift |
| Genie Load Lifter | Genie Load Lifter |
| Genie Powered Superlift | Genie Powered Superlift |
| Genie Superlift | Genie Superlift |
| Genie Tower | Genie Tower |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| GRC-12 | GRC-12 |
| GS-32 | GS-32 |
| GS-46 | GS-46 |
| GS-1530 | GS-1530 |
| GS-1532 | GS-1532 |
| GS-1930 | GS-1930 |
| GS-1932 | GS-1932 |
| GS-2032 | GS-2032 |
| GS-2046 | GS-2046 |
| GS-2632 | GS-2632 |
| GS-2646 | GS-2646 |
| GS-2668 DC | GS-2668 DC |
| GS-2669BE | GS-2669BE |
| GS-2669DC | GS-2669DC |
| GS-2669RT | GS-2669RT |
| GS-3232 | GS-3232 |
| GS-3246 | GS-3246 |
| GS-3268 DC | GS-3268 DC |
| GS-3369BE | GS-3369BE |
| GS-3369DC | GS-3369DC |
| GS-3369RT | GS-3369RT |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4047 | GS-4047 |
| GS-4069BE | GS-4069BE |
| GS-4069DC | GS-4069DC |
| GS-4069RT | GS-4069RT |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-644 | GTH-644 |
| GTH-842 | GTH-842 |
| GTH-844 | GTH-844 |
| GTH-1048 | GTH-1048 |
| GTH-1056 | GTH-1056 |
| HANDY LIFT | HANDY LIFT |
| IWP | IWP |
| IWP Super Series | IWP Super Series |
| Load Lifter | Load Lifter |
| MIX-N-MATCH | MIX-N-MATCH |
| PLC PLI | PLC PLI |
| PLM | PLM |
| Powered Superlift Advantage | Powered Superlift Advantage |
| RL4 | RL4 |
| S-45 | S-45 |
| S-60 | S-60 |
| S-60 HC | S-60 HC |
| S-65 | S-65 |
| S-65 TRAX | S-65 TRAX |
| S-80 | S-80 |
| S-80X | S-80X |
| S-85 | S-85 |
| S-100 | S-100 |
| S-100HD | S-100HD |
| S-105 | S-105 |
| S-120 | S-120 |
| S-120HD | S-120HD |
| S-125 | S-125 |
| S-3800 | S-3800 |
| Super Tower | Super Tower |
| Super-Straddle | Super-Straddle |
| SX-135 XC | SX-135 XC |
| SX-150 | SX-150 |
| SX-180 | SX-180 |
| TML-4000N | TML-4000N |
| TZ-34/20 | TZ-34/20 |
| TZ-50 | TZ-50 |
| TZ-50/30 | TZ-50/30 |
| Z-20/8 | Z-20/8 |
| Z-20/8N | Z-20/8N |
| Z-25/8 | Z-25/8 |
| Z-30/20 | Z-30/20 |
| Z-30/20 N | Z-30/20 N |
| Z-30/20HD | Z-30/20HD |
| Z-33 DC Power | Z-33 DC Power |
| Z-34 IC | Z-34 IC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 IC | Z-34/22 IC |
| Z-34/22 N | Z-34/22 N |
| Z-45/22 | Z-45/22 |
| Z-45/22 MP | Z-45/22 MP |
| Z-45/25 | Z-45/25 |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J IC | Z-45/25J IC |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-51/30J | Z-51/30J |
| Z-60/34 | Z-60/34 |
| Z-62/40 | Z-62/40 |
| Z-80/60 | Z-80/60 |
| Z-135/70 | Z-135/70 |
| Z33/18 | Z33/18 |
| ZX-135/70 | ZX-135/70 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
