Blog

Check oil level in control handle once a week or every 25 hours. Remove plug from top of control handle. Add oil as required to maintain proper oil level. Oil level should be at “OEL” … read more

The exciter oil on the BPU3545 must be changed after every 300 operating hours to ensure maximum protection of the exciter assembly. The bearings in the exciter assembly are splash lubricated and rot … read more

The Wacker BPU3545 drive belt should be inspected and/or adjusted weekly or after every 50 hours of operation. After installing a new belt on the Wacker BPU3545, check the belt tension after the … read more

The drive belt on the Wacker WP1540 and WP1550 should be inspected every 2 weeks or after every 50 hours of operation. Proper deflection of the drive belt is between 1/4"-3/8", halfway between the pul … read more

While testing the clutch on the Wacker WP1540 and WP1550, take care with the beltguard removed to avoid loose clothing, jewelry, long hair, or anything else that may come in contact with the plat … read more

The exciter on the Wacker VP1340, VP1550, VP1135, and VP2050 is the mechanism that generates the vibration for the plate compactor. Like any other mechanical part, this system requires maintenance and … read more

The clutch on the Wacker VP1340, VP1550, and VP2050 is very simple to service, but requires Wacker's clutch removal tool, part number 0115008. This tool should be used to remove the clutch. We do not … read more

Take care when testing machine with beltguard removed to avoid loose clothing, jewelery, long hair, etc., from getting caught in rotating parts. Replace beltguard after testing and before op … read more

The exciter is the mechanism that creates the vibration in the Wacker WP1540 and WP1550. Inside the exciter housing, there are two bearings inside bearing holders and an exciter shaft. The exciter hou … read more

The shockmounts on the Wacker WP1540 and WP1550 plate compactor are wear items that require inspection and servicing. Just like oil, belts, and spark plugs, shockmounts should be inspected regularly f … read more

The adjustable clutch on the Wacker WP1540 and WP1550 may require replacement at some point during the life of your machine. Although it can seem daunting, it's not difficult to replace.  R … read more

October 6th, 2016 Hurricane Matthew is making it's way to the south Florida coastline. As of 11am EST, on Thursday, October 6th,  DHS Equipment will be closing.  October 7th, 2016 If utiliti … read more